|
|
More Product Details
New Page 1
Netgear
108Mbps Wireless Firewall Router w/4-port 10/100 Switch
- Routing Protocols:
- Static & Dynamic Routing with
TCP/IP, multi-VPN pass-through (IPSec, L2TP)
- NAT, PPTP, PPPoE, DHCP (client and
server)
- 10.75x10x3.75 inches (unit
measurements)
27.3x25.4x9.5 cm (unit measurements)
Interface:
- Internet/WAN: 10/100 Mbps
(auto-sensing) Ethernet, RJ-45
- LAN: 4 ports 10/100 Mbps
(auto-sensing) Ethernet, RJ-45
Wireless:
- Network Speeds: 1, 2, 5.5, 6, 9, 11,
12, 18, 24, 36, 48, & 54 Mbps
- (auto-rate capable) 108 Mbps (Static
with Dynamic upgradable)
- Modulation Type: OFDM with BPSK, QPSK,
16QAM, 64QAM, DBPSK, DQPSK, CCK
- Frequency Band: 2.4 GHz
- Standards Capability: 802.11g and
802.11b
- Antenna: 2 dBi attached
Lighted Status Icons:
- Power, Test, Internet, Wireless, and
LAN (connection, activity, and speed)
Firewall:
- Stateful Packet Inspection (SPI),
Network Address Translation (NAT), DoS Attack
- Detection/Logging, Dropped Packet Log,
Security Even Log, E-Mail Log,
- multiple VPN Tunnels (Pass-Through, 2
IPSec, and multiple L2TP & PPTP)
Security:
- 40-bit (also called 64-bit), 128-bit,
and 152-bit (802.11g only)
- Wired Equivalent Privacy (WEP)
encryption
- WPA PSK (Wi-Fi Protected Access
Pre-shared Key) upgradable
|
|
- Product Requirements:
- Broadband (cable, DSL) Internet
service and modem with Ethernet connection
- 2.4 GHz wireless adapter or Ethernet
adapter and cable for each computer
- Windows 98/Me/NT/2000/XP
- Mac OS
- NetWare, UNIX, or Linux
- Internet Explorer 5.0 or Netscape 4.7
or higher
|
|
|
)
