This internal USB 2.0 Card Reader/Writer (CRW) device fits into 3.5¨ drive
bay to save the desktop space, it provides an ideal solution for those who want
the convenience and mobility to read and write the most popular memory cards.
This ingenious device connects to a motherboard's internal USB header port
(most PII and newer motherboards have them, and most aren't used). Sharing the
data is quick and easy. Share between media types or to the computer. It can
also be used as an effective hard drive to transmit large amount of data
immediately between the memory cards and the host computer through USB 2.0
interface.
Technology has made it easy to snap high-quality digital pictures, or take
music on the road with MP3 players, but sharing this data between devices wasn't
easy until now. The 52-in-1 reader/writer provides a common data exchange point
for all sort of memory card storage types. Data can now be easily transferred
from media to a computer or written to other media and shared with others! Fully
compatible with USB 2.0 and 1.1, and support for full-speed 480 mbps, sharing
files with others is quick and easy! The USB 2.0 interface provides a
hot-swappable installation and the compact design allows for taking this device
anywhere!
Specifications :
-
Compatible with USB
2.0 & 1.1 port
-
Support USB power
saving mode
-
Support Plug &
Play and Hot-Swappable.
-
Support slot-to-slot
read/write operation.
-
Support
auto-detecting slot with card inserted.
-
No external power
required
-
Download files via
USB 2.0 high-speed transfer rate up to 480Mbits/sec
-
High efficiency Card
interface hardware engine for data transfer.
-
Disk to disk data
transfer
-
Dynamic plug-into /
remove-from USB port without turning off the system
-
Portable-compact
design and low power consumption
-
AC power adapter is
not required
-
Internal EPROM,
provides high versatility
-
Power: DC + 5 Volts
supplied by USB port.
-
Draws power directly
from USB port without need for auxiliary power sources (batteries or AC/DC
adapter).
-
USB connection
featuring true plug and play
-
View and edit
pictures directly on the reader
-
Download pictures
via USB 2.0 high-speed transfer rate up to 480Mbits/sec
-
Easy to install and
use
-
Specifically
designed for digital cameras and also ideally for using with Palmtop PCs,
Handheld PCs, PDAs, Voice Recorders, MP3 Players and other mobile
electronics using Flash Cards as standard or extended storage media
-
USB powered, no
external power required.
-
Internal design fit
into 3.5¨ drive bay to save the desktop space.
-
Active LED
indicators of power and busy (read/write) equipped.
Interface:
- Internal USB 2.0 device
- Cable included with 9 pin socket to connect to motherboard header
- DC +5.0V from USB port directly
DELL Users: Dell manufacture their own motherboards and have gone away
from the standard motherboard design. For some reason, DELL machines
"normally" only have an 8pin USB header and not the required 9pin
needed for this device, before purchasing, please ensure that your motherboard
has a 9pin USB header (See image below if unsure).
Installation Instruction :
-
Switch off your PC and remove PC
power cord.
-
Remove the PC case side panel.
-
Locate the USB header on your
motherboard.
(a 9 pin Connection marked USB - See opposite)
-
Insert the Cable into the header.
-
Remove Front Case Floppy Drive
Blank.
-
Insert card reader.
-
Secure reader using the 4 screws
provided.
-
Re-Fit Case side Panel.
-
Insert PC Power cord Switch Power
on.
-
Windows will automatically
install new hardware.
-
Start using your new card reader.
Requirements :
Retail Package Content :
)
